Hammer Mill Machine of Wheat

In this economically flourished area, there are many people who know the airflow pulverizer, Hammer Mill Machine of Wheat technology is in a leading position in the same industry.

Hammer Mill Machine of Wheat provides power by the adiabatic expansion of the compressed air and the compressed gas in the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product.

In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize.
The air pulverizer has an upward nozzle under the bottom of the pulverized chamber, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by a nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.

AlPA Composite Powder Hammer Mill Machine of Wheat Sharing: This customer is a cement manufacturer, wants to deliver the cement filler composite powder, select the composite powder of the appropriate particle size, thus enhance cement performance. Investigate the domestic powder equipment manufacturer, and finally chose our AlPA classifier to achieve the pursuit of large capacity, and ensure the particle size of the powder.
Case parameters:

Powder particle size: D50: 6.8μm

Hour Yield: 25T
For powder production companies, customized production, non-standard customized products are an advantage . The demand for each company is different. Therefore, the non-standard custom of powder equipment has gave birth to the powder equipment, and the ALPA of Shandong is a powder equipment non-standard custom enterprise. Our crushing equipment customized for Taiwan companies is a good case. Enterprises that have powder equipment customization needs to contact us.

In the production process, we should pay attention to the maintenance and maintenance of Hammer Mill Machine of Wheat.

1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.

2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time, ensuring production quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) The temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.

Hammer Mill Machine of Wheat, produced by our company, not only from the ordinary powder, not only from 20-2 μm, finely fine powder, but also directly with mechanical crushing equipment, forming closed circuits, improving pulverization efficiency, It can avoid high temperatures in the cavity to cause adhesion, glue, glue, causing operations that cannot be carried out, and at the same time, the grade machine has been well received, and friends who need it are in touch with us!