Turbo Mill Machine of Silicon Carbide

Turbo Mill Machine of Silicon Carbide technology is one of the important basic technologies in the modern industry. In modern industries, it is required to have a small and uniform particle size and higher purity in a powder state. The nature of the raw material changes, making ordinary materials have a broader application range,

Turbo Mill Machine of Silicon Carbide has a wide range of smash, simple and convenient operation, but during the pulverization process, a crushing effect often occurs Different situations.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.

ALPA Trimetic acid lithium material Turbo Mill Machine of Silicon Carbide Case Sharing:

A new energy technology company is a lithium-ion power battery specializing in new energy vehicles, lithium-ion batteries with energy storage High-tech enterprises in R \u0026 D and industrialization of key materials of lithium-ion batteries, take the lead in realizing power battery companies in large-capacity manganese lithium-ion battery scale production and marketization applications.
Case parameters:
Product particle size: D50: 3-25UM
Hour Yield: 3-10kg

The factors affecting the operation efficiency of Turbo Mill Machine of Silicon Carbide equipment have the following points: [ 123] 1. Material performance, in general, air pulverization equipment can adapt to all brittle materials, but due to different material properties, the pulverization performance is also different, due to strength, density, hardness, viscosity, shape and electricity of different materials. The performance is different, which will inevitably lead to the difference in crushing effect. The strength of the material is an important factor. The water content of some materials will change the performance, toughness and viscosity of the crushing material, and the fineness of the pulverized material will produce noise.

2. If the processing capacity of the device is the same, if the processing material is notThe same, the grounding fineness will also be different.In general, the processing capacity of the airflow grinding machine is proportional to the particle size of the product.
3. The influence of back pressure refers to the average pressure of the pulverized indoor gas, and the increase in back pressure is not conducive to the crushing process, affecting the efficiency of gas flow grinding equipment.

Welcome everyone to inquire!