Pin Pulverizer of Washing Powder

PIN Pulverizer of Washing Powder is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Pin Pulverizer of Washing Powder is one Equipment with ultrafine pulverized by air separation, heavy polishing and shearing. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material acquisition system, and the like. The material enters the cylindrical crushing chamber through the feed port and is pulverized and pulverized by a grinding wheel moving around the wear rail. The pulverized material is taken out from the crushing chamber through the negative pressure air flow caused by the fan and enter the material collection system. After filtering the filter bag, the air is discharged, collecting materials and dust, and completes broken.

AlPa Anhydrous Glucose Medium PIN Pulverizer Of Washing Powder Case Sharing: A starch sugar company requires a decentralized equipment for water glucose media, and has not found a lot of powder enterprises. equipment. We have found appropriate equipment in our AlPA. Our PIN Pulverizer of Washing Powder can disperse the water glucose medium.
Technical parameters:
finished particle size: waterless glucose is greater than 18 mesh

PIN Pulverizer of Washing Powder is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.

(3) After pulverizing the material, the rubber powder should be removed to avoid clogging.And affect the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

Pin Pulverizer of Washing Powder produced by our company can not only distribute 20-2μm from the ordinary powder, but also directly with mechanical pulverization equipment, forming a closed circuit, improving pulverization efficiency.It can avoid high temperatures in the cavity to cause adhesion, glue, glue, causing operations that cannot be carried out, and at the same time, the grade machine has been well received, and friends who need it are in touch with us!