Cell Pulverizer of Catalyst Precursor

With the development of society, the application of Cell Pulverizer of Catalyst Precursor has become more large.

Cell Pulverizer of Catalyst Precursor has a small size, light weight, high efficiency, no dust, cleaning, easy to operate, and beautiful modeling. The pulverized tank and the blade are manufactured by stainless steel. It can complete the crushing and fine powder in 3 seconds - 2 minutes. It can quickly crush a variety of Chinese herbal medicines and most of the food, wide and wide, and different nature materials can be very smashed. Loss, smash different materials will not be stronger. Such as Western ginseng, ginseng, three seventh, placenta, flyer, pearl, white peony, 苡 苡 米, green beans, soy, sesame, rice, corn, etc. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease.

ALPA Water Available Feni50Cell Pulverizer of Catalyst Precursor Case Sharing: This customer needs an apparatus that can make ultrafine pulverized metal powder. Finally, we purchased our AlPA CSM710-V mechanical grinder.

Technical parameters:

Production capacity: 200-250kg

Nature maintenance
1, during production, the temperature rise of the bearing must be checked frequently during production When the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault.

2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.

3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.

Cell Pulverizer of Catalyst P in Shan Dong AlPa EquipmentRecursor has been well received by customers.The reason is that AlPa's Cell Pulverizer of Catalyst Precursor, grading is accurate, technically, excellent quality, first-class service.Many customers are also repurchased, and Shandong AlPa Cell Pulverizer of Catalyst Precursor is certainly your non-bilaterability.