Rotor Mill Machine Of Magnesium

With the development of society and life, the demand for Rotor Mill Machine of Magnesium has increasingly demand, and the requirements for fineness, purity and pass rate are increasing. In the current market, there is a great development space.

Rotor Mill Machine Of Magnesium is a set of grading systems, a grading machine and a cyclone separator, a dust collector, and a guide. It can be accurately classified from 200-5000 destination materials, and the material is moved by the casing of the stratigraphic airflow at the lower airflow at the bottom of the flushing airflow to separate the crude material. Separate, The fine particles that meet the particle size requirements are collected by the grading wheel blade gap. The crude particles are partially fine particles to hit the wall, and the roll wall drops to the secondary tight air, the strong Amoy of the second wind The washing is separated, and the fine particles rises to the secondary grade of the fractionation region, and the crude particles are dropped to the unloading port. This can be accurately graded out of the 1000 purpose powder required by this customer.

ALPA Chemical Pigment Rotor Mill Machine of Magnesium Case Sharing: The company is a professional company that specializes in research and development, production and sales of high performance, in its production process, needed to use pigment ultrafine pulverized equipment. The company's ultrafine crushing equipment is from our AlPa, which uses our company's Rotor Mill Machine of Magnesium.

Technical parameters:
finished particle size: 10-45μm
Production capacity: 300kg

In general, there are some sounds in operation. When Rotor Mill Machine Of Magnesium is pulverized, there will be broken sounds, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.

1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced.
2. There will be noise during the pulverization process. The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.
3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.

Shandong Alpa focused on the production, development, sales of powder engineering equipment and other powder engineering equipment, etc. Three parts are composed, collecting gas streams, air flow grading, mechanical and smashing, flexible realizationThe flow is pulverized, the airflow classification, the mechanical comminution is integrated. It is suitable for 325 titles-100,000 (45 μm), suitable for a variety of crushing scenes, from research institutes, colleges and universities laboratories, new products, new materials to the factory research instituteR \u0026 D and experimentation.It is necessary to make the device selection according to the actual needs.Welcome new and old customers to come to consult!