Cell Mills for Amorphous Carbon

Cell Mills for Amorphous Carbon is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.

Cell Mills for Amorphous Carbon works in work It will rise, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.

ALPA Trimmonic Cell Mills for Amorphous Carbon Case Sharing:

A lithium-electric material company main product is \"lithium-electrode material\", the most important component of the lithium-ion battery includes electrolyte, isolation material, positive electrode Materials, negative electrode materials, housing, etc. High-end lithium battery sector requirements for sexy life life.
Case parameters:
Product particle size: D50: 9.1μm
Hour Yield: 300kg

Cell Mills for Amorphous Carbon installation notes

1, the charter, fan and other hosts The equipment is initially inspected, and there is an organic damage during transportation or long-term storage. It is necessary to see if there is no abnormality in the equipment and the fan airway, turn the hierarchical impeller and the wind turbine spindle, and observe whether it is flexible.
2. Check the degree of fastening of the equipment pre-installed components, and must be added to the lubricating oil to be lubricated.
3, the mounting grading wheel should strictly prevent collision, classify the host, and the fan should be tested, and the level is specified by the gasket, and there is a basic requirements and the foundation fixation.
4, require the sealing pipe interface to configure the sealing gasket.
5, after the layout machine is installed, first observe the direction of grading motor.
6. When the control cabinet is installed, the corresponding relationship between the terminal sequence number and the equipment is carefully verified.
7. After the installation is completed, the first empty car is running 1-2 hours, and it is easy to securely check the accuracy and coordination of the equipment action at any time.

The performance characteristics of the milling machines of each series are different, different granularity, different production efficiency, different production and production environment, the price of processing equipment is also different, customers can consult the ALPA engineer to purchase appropriate models and specifications according to their own situationWelcome to inquire.