Vibration Crusher for Lithium Cobal Oxide

Most of the product production and processing in the current stage uses Vibration Crusher for Lithium Cobalt Oxide to make products for products, which is one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

When the Vibration Crusher For Lithium Cobalt Oxide screen material, the screen has good common performance under the pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without a rotating member. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors.

The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.

Alpa Xiashi Powder Vibration Crusher for Lithium Cobalt Oxide Experiment: A mining company needs to be sorted by Xialuden powder, through the experiment, our AlPA can do product particle size: D90: 16.8μm, Yield: 246kg / h 加 加 量

Welcome to the majority of major manufacturers with Xixia stone graded demand to the factory, and collective experiments.

In general, there are some sounds in the operation. Vibration Crusher For Lithium Cobalt Oxide must have broken sounds when crushing raw materials, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.

1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced.

2. There will be noise during the pulverization process. The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.
3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.


The equipment market is changing. Currently, Vibration Crusher For Lithium Cobalt Oxide has certain demand in the market, but the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.