Rotor Crusher For Potassium Perchlorate

With the development of society, the application of Rotor Crusher For Potassium Perchlorate has become more large.

What factors affect the performance parameters used by Rotor Crusher for Potassium Perchlorate?

The following is a detailed description:

1. Feed granularity control

Most Rotor Crusher For Potassium Perchlorate has a certain upper limit requirement for the feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium

Currently, the working medium of Rotor Crusher For Potassium Perchlorator is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed

Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Granular limit

Rotor Crusher for Potassium Perchlorate In the pulverization process, as the material particle size is reduced, the crystallization and intensity of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material specific surface area increases, the surface activity of the particles, the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.



ALPA Peel Peas Rotor CRUSHER for Potassium Perchlorate Case Sharing: The company uses the food professional processing enterprises in R \u0026 D, processing and sales, and has been discovered by multi-examination or our Alpa's Rotor CRUSHER for Potassium Perchlorate. All needs.
Technical parameters:
Production capacity: 2T +/- 10%

Rotor Crusher For Potassium Perchlorate Problem with dust leakage, can be processed from the following aspects
1 , Install the filter dust removal equipment. For the dust generated by the high-temperature pulverizer, foam dust removal, wetting agent dust removal, ultrasonic atomization technology, composite filter bag dust removal, folding dust release bag, wide spacing electric precipitator dust removal. The user can also consider the overall performance of dust removal, so combined dust removal is used.
2. Due to the mild leakage during the production process, the dust will appear, causing pollution to the work area. Therefore, the user needs to guarantee the sealing property of the pneumatic grinding machine.

3, increasing the humidity of the equipment operation area, strengthening ventilation, storing fire equipment, avoiding a large amount of dust inhaling the harm caused by the human body.

4. Production enterprises should be equipped with corresponding protective supplies as required for air compressor operators. The operators should also wear protective supplies in accordance with regulations.
5, do a good job in the maintenance and management of existing dust equipment, guarantee its normal operation and use dustproof. The maintenance management of high temperature crushers seems simple, and actual operation requires good attitude and habits.

Welcome everyone to inquire!