Rotor Crusher of AGAR

In the classification operation of industrial production at this stage, the use of Rotor Crusher Of AGAR is mainly targeted for the effective smash of solid particles, and it is also a commonly used comminution equipment in the ultrafine pulverization process.

Rotor Crusher Of AGAR is a set of hierarchical systems, grading machines and cyclone separators, dust collectors, and airformations into a set of grading systems. It can be accurately classified from 200-5000 destination materials, and the material is moved by the casing of the stratigraphic airflow at the lower airflow at the bottom of the flushing airflow to separate the crude material. Separate, The fine particles that meet the particle size requirements are collected by the grading wheel blade gap. The crude particles are partially fine particles to hit the wall, and the roll wall drops to the secondary tight air, the strong Amoy of the second wind The washing is separated, and the fine particles rises to the secondary grade of the fractionation region, and the crude particles are dropped to the unloading port. This can be accurately graded out of the 1000 purpose powder required by this customer.

ALPA Crystalline Sulfur Rotor Crusher of AGAR Case Sharing: Shenyang needs an apparatus capable of ultrafine pulverization of crystalline sulfur. Crystalline sulfur is a flammable and explosive raw material, so there is a very high demand of the explosion-proof system of the pulverized apparatus. After many examinations, our nitrogen protection models of the company met the production needs of the company. Rotor Crusher Of AGAR has an advantage in security, production capacity, energy consumption.

Technical parameters:
Finished granularity: 200-300 目
Production capacity: 1.5T

Super Micro Rotor Crusher Of AAR Machine Maintenance and Store Precautions:

1 Regularly check the fastening of each component, prevent it from loosely falling off, damage the machine.
2, each oil injection hole should be refueling, and the bearing portion is cleaned every half year to fill the lithium-based grease.
3
4, when the machine is deactivated, the external debris should be cleared, and the grease is filled with all the rotating parts, stored in the storage of air drying, non-corrosive gas.

The company has consistently follows the standard management, puts the quality in front of the production and service policy, and provides products and services to customers with confidence and weighing airflow crushers.