Rod Pin Mill of Boron Nitride

Rod pin mill of Boron Nitride is an industrial equipment. With the development of society and the needs of people's lives, the demand for various fine powders is increasingly demanding requirements. It is also increasingly high, and the application of the classifier is also more extensive.

ROD pin mill OF BORON Nitride agency reasonable, stable operation, low energy consumption, large crushing capacity, small size, no malfunction, and convenient cleaning and maintenance. Typically, the outer casing uses water-cooled and self-produced air volume, transporting a powder material, low temperature rise, and the thermal material can be pulverized. The blade wear is reduced by using a large number of ultrasonic vortices generated by the back surface of the blade and the high frequency pressure. Compact, no dust overflow.

ALPA Carbon Rod Pin Mill of Boron Nitride Case Sharing: The company produces superfine and ultra-fine pulverized in the production of static pressure graphite. After multi-party examinations and experiments, finally selected our AlPA as a cooperative customer, we offer the Rod Pin Mill of Boron Nitride provided to its carbon pulverized particle size, particle size range, yield and other needs.

Technical parameters:

Finished granularity: D65: 200 目
Production capacity: 800-1000kg


Now let's talk about the common fault of Rod Pin Mill of Boron Nitride.

Rod Pin Mill of Boron Nitride Troubleshooting:
1, the feedback is improper, the damper is adjusted, the pipeline is blocked, the screen is blocked, the dust bag is inferior or severe wear, the hammer surface is serious Waiting, etc. will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves the efficiency of equipment.

Rod Pin Mill of Boron Nitride has a lot of use, and I want to know more about the ultra-fine gas flow classifier, welcome to consult with us!