Hammer Grinder of Iron Ore Powder

Hammer Grinder of Iron Ore Powder can be used for important or need to be grounded to granular product processing, AlPA ultra-fine pulverizer product is good, affordable, factory direct sales, also push after-sales service service for customers, service attitude

Hammer Grinder of Iron Ore Powder temperature is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

A technology company is a metal material as the main business, serving emerging industries, in powder materials and products, magnetic materials and products, welding materials and products , Filter materials and other fields. We continue to innovate around our customers, and work with partners. We are committed to providing competitive solutions and services for advanced metal materials, product programs, and other functional applications to create value for customers. Products have been sold to several countries and regions, and are recognized by many well-known companies and customers at home and abroad.
Case parameters:
Hummer Yield: 300kg

1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.
2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
3, regular inspections for the lids, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7, the spiral feeder is 4000 hours,Adding ordinary calcium based grease.
Welcome to choose Shan Dong Alpa, company specializing in the production and development and service of Hammer Grinder of Iron Ore Powder product technology, the company provides customers with safe and reliable products and services to solve our customersHave worry.