Pin Grinder for Pitch Coke

PIN Grinder for Pitch Coke is well balanced, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.

PIN Grinder for Pitch Coke and cyclone separator, dust collectors and air machines have become a complete crushing system. After filtering the compressed air, the high-speed nozzle is sprayed into the pulverized chamber, and the material is repeated, friction and shear at the intersection of the multi-high pressure airflow.

The crushing material moves together with the rising airflow to the pulverized region under suction of the fan, producing a strong centrifuge generated by a high speed rotary pulley. Under the action of force, the fine particles are separated, and the cyclone and dust collectors are collected by the pulverizing wheel according to particle size particles, and the coarse particles fall into the pulverized region to continue to be pulverized.

ALPA Organic Pigment PIN Grinder for Pitch Coke Case Sharing: The company is a Taiwan chemical raw material enterprise. In 19 years, the company purchased a mechanical grinding machine for pulverizing organic pigments from our AlPa.

Technical parameters:

Finished product particle size: D50 less than 325 mesh
Production capacity: 300kg

PIN Grinder for Pitch Coke Vibration Causes and Solutions can be carried out from the following aspects :
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.

2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.

3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.


ALPA powder is dedicated to the development, production and sales of ultrafine powder and graded equipment, support according to demand, equipment model, reliable quality, high efficiency, low energy consumption, easy operation, price Reasonable, can consult 24 hours!