Rotor Mills Of Donkey-Hide

At present, Rotor Mills Of Donkey-Hide has gradually entered people's lives, more and more plants, and companies are using the equipment.

In the process of production, Rotor Mills of Donkey-Hide mainly utilizes compressed air to pass the freezing, filtration, and drying in the apparatus, form a supersonic air flow through the nozzle inside the device. After a powerful pressure rotation into the grinding chamber, the material to be pulverized in the grinding chamber exhibits a fluidized form.

ALPA carbonate Rotor Mills of Donkey-Hide case sharing: This customer is a company producing, selling lithium carbonate, lithium hydroxide, potassium sulfate, and salt, in the process of selling lithium carbonate. It is found that the current customer needs is ultrafite powder of lithium carbonate, so it has upgraded the production line of lithium carbonate, purchasing our AlPa's multiple Rotor Mills of Donkey-hide.
Technical parameters:
Finished granularity: D50: 5-8μm
Production capacity: 450kg

1, check all the lines, electrical components, etc. of the pulverizer, whether it can work properly. Whether the machine is grounded, so that the housing is powered by electric shock. Whether the machine spindle has a card death, if it should be handled in time. Whether the machine has an abnormal situation during operation, if there is a stop check.
2, check the blade, is tightened, whether the blade gap can reach the specified standard. Before using the pulverizer, check the working room is enough or slidable, if it should be removed in time.
3, after the offset is running, it can begin to start the feed. The pulverizer should stop the feed before stopping. Wait until the machine is completely discharged, it can be stopped.
4, the feed should be uniform, not over, so as not to increase the burden on the machine. The pulverizer cannot be cleaned, maintenance, etc. during operation.