Rotor Mills for pea shell

With the continuous increase in social needs, Rotor Mills for pea shell continues to improve in the use of performance, finished product quality, service life, etc., very well, the raw materials are processed into microtes and even nanoscale fine powder, and they have also been chemical. , Food, pesticides, cosmetics, dyes, coatings, electrons, etc. have been widely used.

Rotor Mills for pea shell is affected by many industries, but it also has some shortcomings.

During the purchase period, the manufacturing cost of Rotor Mills for pea shell is high, energy consumption, and high processing cost; the product particle size is difficult to achieve submicron grade, and the output is greatly reduced during 10 μm or less, and the processing cost is sharp. Increase.

But the application of Rotor Mills for pea shell is really a wide range of:

1, non-metallic mine

Typical materials are: hard kaolin, talc, graphite , Square alphabet, gypsum, diatom, silica bitcite, heavy crystal stone, osaite, aluminum hydroxide, etc., ultra-fine pulverization, and tamperite and other materials such as nanocalbonate, cerium oxide.
2, thermal materials

Typical materials include lactose, wax, resin, fat, bone powder, plants, etc .;

3, hyperparation processing of Chinese herbal medicine and raw materials [123
Typical materials include pollen, hawthorn, mushrooms, pearl powder, stomach medicine, Nimoda, antibiotics, Ganoderma lucidum, five times, He Shouwu, wearing heart, mint, houttuynia, fern root, puerargen, slate blue root, etc.


ALPA Steel Slag Rotor Mills for Pea Shell Case Sharing: This customer is a Si'an Steel Residue Application Technology Co., Ltd., mainly engaged in the reuse of steel slag. During the production process, steel slag ultrafine powder is required, screening the required steel slag micropowder, the customer investigates many domestic powder equipment manufacturers, and finally chose our ALPA Vertical Air Classifier.
Case parameters:

Product particle size: D97: 5-75μm

Hour Yield: 200-500kg

Ultrafa Rotor Mills for pea shell installation and commissioning five major precautions
1, super When the microfiner is fixed, it should be installed on the cement base, and the flow operation should be installed on four-wheel bumper.

2, the ultrafine pulverizer should select the power machine according to the prescribed power supply, and ensure its rated working speed, it is strictly forbidden to speed up, otherwise it will cause personal safety accidents.

3, ultrafine pulverized machine beltThe wheel is parallel to the power wheel, the axis is parallel, the triangular belt must be on a flat line, rotate with hand, and tighten appropriate.There is sometimes hit when transportation, and whether there is an abnormal phenomenon such as bumps in front of the inspection machine, if there is a timely adjustment or exclude.
4, pick up the power, let the machine operate in the working condition, control the switch position, should be free, keep the workplace smooth, and ensure convenient operation.
5, after the connection is completed, the bearing should fill the butter, the bearing cover is the semi-automatic butter cup, and the cacrid is added to the bottom, which can be repeated several times, and the oil should be worked.Keep the bearing life.


Welcome everyone to continue to pay attention to our website to learn more!