Industrial Rotor Mill Pulverizer Machine

With the continuous development of pulverizer technology, Industrial Rotor Mill Pulverizer Machine has gradually penetrated into daily life.

Many manufacturers to make a crushing process will choose to buy a Industrial Rotor Mill Pulverizer Machine, but not all crushers can apply production and processing, and the wrong processing method will make the pulverizer wear speed becomes fast. . The mill is wear is too fast, and the inner cavity of the pulverizer of the material should be selected when the material hardness is too large.

The device operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement losses.
The product after the crushing products are generally single peaks. If there is a double-peak or multimodal main reason, the pulverization pressure is unstable. The solution is based on the gas supply of the gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform liquidity, and the stable control feed speed. A filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cakes in the crushed chamber will then return to the production.

ALPA Sodium Hawch Industrial Rotor Mill Pulverizer Machine Case Sharing: This customer is mainly engaged in high energy chemistry, hydrogen production and hydrogen energy development, special gas, fine chemical, environmental engineering, etc. The research institute requires a device that can be superfined with sodium chlorate. Find a domestic powder equipment enterprise. Finally, I bought a Industrial Rotor Mill Pulverizer Machine in our Alpa.

Technical parameters:
Finished particle size: 100-325 mesh
Production capacity: 500kg

Free experiments and testing, and provide 24-hour consultation services, welcome to use .