Best Small Rotor Mills

Best Small Rotor Mills is a crushing device commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settle more in the air than in the water. Moreover, the density and viscosity of the air varies with temperature and pressure.
In order to cause air flow, wind pulverization equipment typically requires an appropriate fan (exhaust or blast).

When the airflow is classified, the fine particles are typically taken away by the airflow. In some cases, the raw material is sent to the gas stream into a pulverized device.

It is well known that the load of solid particles in air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration of the solid in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement.

The speed required to move the particulate material in the horizontal and vertical directions is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for the density 1.5 of the pulverization coal per centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments.

In the rising airflow, the airflow speed required to suspend a certain density and particle size is greater than the calculated value of free settling, which is due to the uneven distribution of the airflow along the pulverizing chamber portion.
The Best Small Rotor Mills has the characteristics of high pulverization, high pulverization efficiency, high pulverization accuracy, accurate cutting particle size, and good stability.

ALPA Organic Pigments Best Small Rotor Mills Case Sharing: The company is a Taiwan chemical raw material enterprise. In 19 years, the company purchased a mechanical grinding machine for pulverizing organic pigments from our AlPa.
Technical parameters:
D50 less than 325 mesh

ALPA powder is committed to the development, production and sales of ultrafine powder and grading equipment, support, and supports according to demand.Equipment model is complete, reliable, high efficiency, low energy consumption, easy operation, reasonable price, 24 hours can be counted!